Argentina power plugs IRAM 2073 (Argentinian 10 A/250 V) and compatible types (Type I),connected with athree-wire earthed plug rated at 10 A (or 20A), 250 V defined by IRAM and used in Class 1 applications in Argentina.This plug is similar in appearance to the Australasian and Chinese plugs.
The plug and socket used in Class 1 applications in Argentina is defined by IRAM. The applicable standards are: IRAM 2073 “Two poles plugs with earthing contact for domestic and similar purposes, rated 10 A and 20 A, 250 V a.c.” and IRAM 2071 “Two pole socket – outlets with earthing contact for 10 A and 20 A, 250 V a.c, for fixed installations. ” It is similar in appearance to the Australasian and Chinese plugs. The pin length is same as the Chinese version. The most important difference from the Australian plug is that the Argentinian plug is wired with the line and neutral contacts reversed.
This 10 amp plug has two flat 1.6 mm thick blades, set at 30° to the vertical, forming an upside-down V. Their centers are spaced 13.7 mm apart and both prongs measure 17.3 mm in length and 6.3 mm in width. The flat earth blade also measures 6.3 by 1.6 mm, but it is 20 mm long. The distance between the center of the grounding pin and the middle of the plug is 10.3 mm. There is an ungrounded version of this plug as well, with only two flat V-shaped prongs. Since 2004, all new type I plugs need to have insulated live and neutral pins.
A plug/socket configuration rated at 15 amps is also available, but the ground pin is wider: 8 mm instead of 6.3 mm. A standard 10 amp plug will fit into a 15 amp outlet, but a 15 amp plug only fits this special 15 amp socket. There is also a 20 amp plug whose prongs are wider still. A lower-amperage plug will always fit into a higher-amperage outlet but not vice versa. Australia’s plug/socket system is codified as standard AS 3112. Although there are slight differences (the pins of Chinese plugs are 1 mm longer and the sockets are installed with the earth contact facing upwards), the Australian plug mates with the socket used in the People’s Republic of China (mainland China)
Argentina Power Supply Cord products with IRAM certification are manufactured to the Argentina IRAM 2073 (Argentinian 10 A/250 V) and compatible types (Type I),connected with a three-wire earthed plug rated at 10 A (or 20A), 250 V defined by IRAM and used in Class 1 applications in Argentina.This plug is similar in appearance to the Australasian and Chinese plugs.The pin length is same as the Chinese version.The pin length is same as the Chinese version.For inquiry Argentina power cord please click this link for Argentina plug and drawings as we are China leading Argentina power cords manufacturer and supplier providing cheapest prices of Argentine IRAM approved ac power cord,ac power cable,electric ac plug,ac power plug,ac power connector,computer power cable,electric plug,electric power cord,electrical power plug,electrical power cord,laptop power cord,power cord with switch,power supply cord with IEC C7,C5,C13,C15,C19 connectors